/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
Ricambi
GuideRisposte
Modifica
Nikon Coolpix L330 Front Housing Replacement

Nikon Coolpix L330 Front Housing Replacement

Rajeev

Rajeev e 2 altri collaboratori

Ultimo aggiornamento il June 27, 2020

30 - 50 minuti
Difficile

Introduzione

Vai al passo 1

This guide gives a step by step procedure to remove the front housing for internal repairs.

Cosa ti serve

Strumenti

Mostra di più…

  1. Nikon Coolpix L330 Front Housing Replacement, Back Housing: passo 1, immagine 1 di 3 Nikon Coolpix L330 Front Housing Replacement, Back Housing: passo 1, immagine 2 di 3 Nikon Coolpix L330 Front Housing Replacement, Back Housing: passo 1, immagine 3 di 3

    • There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head.

    • Two 1.5x2.5mm screws on the right side.

    • Two 1.5x2.5mm screws on the underside.

    • Two 1.5x2.5mm screw on the left side.

    Modifica

  2. Nikon Coolpix L330 Front Housing Replacement: passo 2, immagine 1 di 2 Nikon Coolpix L330 Front Housing Replacement: passo 2, immagine 2 di 2

    • After removing the screws, use a metal spudger or plastic opening tool to push the back cover out.

    • The metal spudger can damage the plastic housing, so use caution when applying any pressure to it. Use a plastic opening tool to reduce the risk of damage to the housing.

    • Remove the back housing of the camera by lifting it directly up.

    • The back cover may be slightly tight, therefore more force may be needed to lift it up.

    Modifica

  3. Nikon Coolpix L330 Front Housing Replacement, Front Housing: passo 3, immagine 1 di 1

    • Remove the four 1.5x2.5mm screws in the battery housing using a PH000 screw head.

    Modifica

  5. Nikon Coolpix L330 Front Housing Replacement: passo 4, immagine 1 di 1

    • Remove the two 1.5x2.5mm screws below the flash unit using a PH000 screw head.

    Modifica

  6. Nikon Coolpix L330 Front Housing Replacement: passo 5, immagine 1 di 3 Nikon Coolpix L330 Front Housing Replacement: passo 5, immagine 2 di 3 Nikon Coolpix L330 Front Housing Replacement: passo 5, immagine 3 di 3

    • Remove the black tape covering the electrical connections.

    • Remove the 1.5x2.5mm screw using a PH000 screw head.

    • Desolder the six marked wires.

    • The screen has been removed as well as the back-plate in this step, however they need not be removed to replace the front housing.

    Modifica

  7. Nikon Coolpix L330 Front Housing Replacement: passo 6, immagine 1 di 2 Nikon Coolpix L330 Front Housing Replacement: passo 6, immagine 2 di 2

    • Insert a plastic opening tool between the front housing and inner frame.

    • Lever the tool to slide the front housing forward.

    Modifica

  8. Nikon Coolpix L330 Front Housing Replacement: passo 7, immagine 1 di 3 Nikon Coolpix L330 Front Housing Replacement: passo 7, immagine 2 di 3 Nikon Coolpix L330 Front Housing Replacement: passo 7, immagine 3 di 3

    • Position the fingers of one hand on the inner frame and the other hand around the lens barrel.

    • Pull the front housing away from the inner frame.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Rajeev

Membro da: 02/09/16

623 Reputazione

4 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

USF Tampa, Team 2-10, Cagle Spring 2016 Membro di USF Tampa, Team 2-10, Cagle Spring 2016

USFT-CAGLE-S16S2G10

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 996