Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 3.0mm screws on the bottom of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 3.0mm screws on the left side of the camera near the memory card compartment.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 3.0mm screws on the right side of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully open the back cover. Take care as there are connectors still attached.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the cable by pulling the head upward along the green circuit board. If you only are changing the LCD, skip this step.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the ribbon cable by grabbing the two handles and pulling it directly out of the socket. If you are only changing LCD, skip this step.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.