Aggiusta la tua roba Comunità Store

Nikon Coolpix 5400 Back Cover Replacement

Introduzione

This guide will walk you through how to remove the back case of the Nikon Coolpix 5400. The processes only requires a handful of screws to be removed and a few connecting wires. When removing the wire connectors, be careful not to break the plastic fittings.

Cosa ti serve

  1. Nikon Coolpix 5400 Back Cover Replacement, Back Cover: passo 1, immagine 1 di 1

    • Remove one 3.0mm Phillips #0 screw from the top of the case.

    Modifica

  2. Nikon Coolpix 5400 Back Cover Replacement: passo 2, immagine 1 di 1

    • Remove two 3.0mm Phillips #0 screws from the card reader side of the case.

    Modifica

  3. Nikon Coolpix 5400 Back Cover Replacement: passo 3, immagine 1 di 1

    • Remove four 3.0mm Phillips #0 screws from the bottom of the camera.

    Modifica

  4. Nikon Coolpix 5400 Back Cover Replacement: passo 4, immagine 1 di 1

    • Remove one 3.0mm Phillips #0 screw from the side of the camera.

    Modifica

  6. Nikon Coolpix 5400 Back Cover Replacement: passo 5, immagine 1 di 1

    • Use a plastic opening tool to gently remove the back case from the rest of the camera.

    Modifica

  7. Nikon Coolpix 5400 Back Cover Replacement: passo 6, immagine 1 di 1

    • Pull the back of the camera cover apart.

    • Connecting wires that are still attached to the back cover are fragile.

    Modifica

  8. Nikon Coolpix 5400 Back Cover Replacement: passo 7, immagine 1 di 2 Nikon Coolpix 5400 Back Cover Replacement: passo 7, immagine 2 di 2

    • Remove the two 4.0mm Phillips #0 screws holding the circuit board to the back case.

    Modifica

  9. Nikon Coolpix 5400 Back Cover Replacement: passo 8, immagine 1 di 1

    • Pull the LCD screen cables in the direction that the wires are exiting the circuit board.

    • Pull the wire connector gently, the plastic is very fragile.

    Modifica

  10. Nikon Coolpix 5400 Back Cover Replacement: passo 9, immagine 1 di 2 Nikon Coolpix 5400 Back Cover Replacement: passo 9, immagine 2 di 2

    • Pull the toggle wheel wire connector up and away from the top of the camera.

    • Pull the button control panel wire connector up and away from the top of the camera.

    • Gently remove the wire connectors; the plastic is fragile.

    Modifica

  11. Nikon Coolpix 5400 Back Cover Replacement: passo 10, immagine 1 di 1

    • Remove the six 3.0mm Phillips #0 screws holding the button control panel.

    • Remove the back cover from the camera body.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 354