Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nikon CoolPix S600 Front and Rear Casing Replacement

Cosa ti serve

  1. Nikon CoolPix S600 Front and Rear Casing Replacement, Front and Rear Casing: passo 1, immagine 1 di 1
    • With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.

  2. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 2, immagine 1 di 1
    • Remove the chrome side cover from the body of the camera.

  3. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 3, immagine 1 di 1
    • Remove the four 3.2 mm screws on the bottom of the camera.

  4. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 4, immagine 1 di 2 Nikon CoolPix S600 Front and Rear Casing Replacement: passo 4, immagine 2 di 2
    • Remove the two 3.2 mm screws from the right side of the camera (with lens is facing forward)

    • Remove the one 3.2 mm screw from the left side of the camera (with lens facing foward)

  5. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 5, immagine 1 di 2 Nikon CoolPix S600 Front and Rear Casing Replacement: passo 5, immagine 2 di 2
    • Gently separate the back cover from the body of the camera.

    • The back casing will still be connected to the circuit board by a ribbon

  6. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 6, immagine 1 di 1
    • Use the tweezers to disconnect the ribbon from the circuit board.

  7. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 7, immagine 1 di 1
    • Remove the one 2.6 mm screw from the left side of the camera (with the lens facing forward)

  8. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 8, immagine 1 di 2 Nikon CoolPix S600 Front and Rear Casing Replacement: passo 8, immagine 2 di 2
    • Gently separate the front cover from the body of the camera.

    • The front casing will still be connected to the circuit board by a few wires

  9. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 9, immagine 1 di 1
    • Remove the two 3.2 mm screws that hold the flash to the front cover.

  10. Nikon CoolPix S600 Front and Rear Casing Replacement: passo 10, immagine 1 di 3 Nikon CoolPix S600 Front and Rear Casing Replacement: passo 10, immagine 2 di 3 Nikon CoolPix S600 Front and Rear Casing Replacement: passo 10, immagine 3 di 3
    • Use the Spudger to remove the copper colored light bulb clip.

    • Remove the front cover entierly from the camera body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cuesta, Team 1-6, Zipperian Fall 2011 Membro di Cuesta, Team 1-6, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G6

2 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,250