Nikon CoolPix S5 Back Cover Replacement

Introduzione

This guide is to be used to install the back cover in the event that it becomes damaged. A Phillips screwdriver will be needed to complete this installation.

Cosa ti serve

Passo 1 Back Cover

Nikon CoolPix S5 Back Cover Replacement, Back Cover: passo 1, immagine 1 di 1

Remove the wristlet by untying the strap.

Modifica

Passo 2

Open the SD/Battery cover.

Modifica

Passo 3

Remove the four screws adjacent to the SD/battery opening using a Phillips #00 screwdriver.

Modifica

Passo 4

Remove the side paneling of the camera by prying it off with your hands.

Modifica

Passo 5

Start on the wristlet side of the camera and use the #00 Phillips screwdriver to remove the two screws that hold the backplate in place.
Repeat the removal of the two screws on the other side of the camera.

Modifica