This guide is to be used to install the back cover in the event that it becomes damaged. A Phillips screwdriver will be needed to complete this installation.


Nessuna parte richiesta.

Remove wrist strap by unknotting the strap.
  • Remove wrist strap by unknotting the strap.

Aggiungi Commento

Open SD/Battery cover.
  • Open SD/Battery cover.

Aggiungi Commento

  • Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.

Aggiungi Commento

  • Pull the silver side panels on each side.

Aggiungi Commento

  • On the right side of the camera (that contains the wrist strap loop), use the screwdriver to remove the two screws holding the backplate in place.

    • Repeat this step for the left side.

Aggiungi Commento

  • Pull the back silver faceplate to separate it from the rest of the camera.

Aggiungi Commento


To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Patty Richeson

Membro da: 11/03/2013

75 Reputazione

4 Guide realizzate


Clemson, Team 12-5, Benson Spring 2013 Membro di Clemson, Team 12-5, Benson Spring 2013


4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 374