Salta al contenuto principale

Nikon COOLPIX P7700 Back Casing Replacement

Cosa ti serve

  1. Nikon COOLPIX P7700 Back Casing Replacement, Back Casing: passo 1, immagine 1 di 2 Nikon COOLPIX P7700 Back Casing Replacement, Back Casing: passo 1, immagine 2 di 2
    • Turn camera to the left side and remove the two 4.3 mm black side screws using the Phillips #00 screwdriver.

    • Remove the side panel.

  2. Nikon COOLPIX P7700 Back Casing Replacement: passo 2, immagine 1 di 1
    • Open the touch screen, and remove the three 4.3 mm black screws inside using the Phillips #00 screwdriver.

  3. Nikon COOLPIX P7700 Back Casing Replacement: passo 3, immagine 1 di 1
    • Remove the 4.3 mm black screw on top of the camera, right above where the screen folds out. Use the Phillips #00 screwdriver.

  4. Nikon COOLPIX P7700 Back Casing Replacement: passo 4, immagine 1 di 1
    • Remove the two 4.3 mm black screws on the right side of the camera using the Phillips #00 screwdriver.

  5. Nikon COOLPIX P7700 Back Casing Replacement: passo 5, immagine 1 di 1
    • Remove the 4.3 mm black screws on the bottom of the camera using the Phillips #00 screwdriver.

  6. Nikon COOLPIX P7700 Back Casing Replacement: passo 6, immagine 1 di 2 Nikon COOLPIX P7700 Back Casing Replacement: passo 6, immagine 2 di 2
    • Begin separating the camera into two parts.

    • It is okay to remove the orange ribbon. This will be easily put back into place when re-assembling.

  7. Nikon COOLPIX P7700 Back Casing Replacement: passo 7, immagine 1 di 1
    • Remove the back casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Dustin Wahl

Membro da: 03/11/15

775 Reputazione

4 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,782