Remove the screw located near the speaker port using a Phillips 00 screwdriver.
  • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

Aggiungi Commento

Turn camera upside down so that the battery compartment is facing you.
  • Turn camera upside down so that the battery compartment is facing you.

  • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

Aggiungi Commento

  • Rotate the camera to the opposite side where the A/V outlet is located.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Aggiungi Commento

  • Turn the camera so that the Wi-Fi adapter is facing you.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Aggiungi Commento

  • Using a plastic opening tool, pry the front casing of the camera.

  • Continue this motion all around the front casing of the camera.

  • Gently pull apart the front casing from the rest of the camera.

Aggiungi Commento

  • Using the plastic opening tool pry the back casing of the camera.

Aggiungi Commento

  • Orange ribbon is fragile

  • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

Aggiungi Commento

  • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

  • Pull apart the orange ribbon and front casing from the rest of the camera.

Aggiungi Commento

  • Use plastic opening tool to carefully pry the LCD Screen from the camera.

Aggiungi Commento

  • Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.

Aggiungi Commento

Aggiungi Commento

  • Continue by removing two screws from the back of the camera body.

Aggiungi Commento

  • Remove the screw connecting the wifi card cover to the front of the camera.

Aggiungi Commento

  • Remove the final screw connecting the Wifi card cover to the case.

Aggiungi Commento

  • Gently pull the Wifi card cover off of the camera body.

Aggiungi Commento

  • Remove the screw holding the Wifi Card to the camera body.

Aggiungi Commento

  • Gently pull the WiFi card out of the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joshua Avery

Membro da: 23/01/2012

7 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 3-28, Amido Winter 2012 Membro di Cal Poly, Team 3-28, Amido Winter 2012

CPSU-AMIDO-W12S3G28

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 757