Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nikon 1 J5 Back Case Replacement

Cosa ti serve

  1. Nikon 1 J5 Back Case Replacement, Remove Micro SD card and Battery: passo 1, immagine 1 di 1
    • Remove Micro SD card and Battery

  2. Nikon 1 J5 Back Case Replacement: passo 2, immagine 1 di 3 Nikon 1 J5 Back Case Replacement: passo 2, immagine 2 di 3 Nikon 1 J5 Back Case Replacement: passo 2, immagine 3 di 3
    • Remove 2 screws

    • Open plastic LCD connector cover

    • Lift FPC connector latch

    • Detach LCD FPC

  3. Nikon 1 J5 Back Case Replacement: passo 3, immagine 1 di 3 Nikon 1 J5 Back Case Replacement: passo 3, immagine 2 di 3 Nikon 1 J5 Back Case Replacement: passo 3, immagine 3 di 3
    • Remove 4 screws

    • Remove LCD module

  4. Nikon 1 J5 Back Case Replacement, Back Case: passo 4, immagine 1 di 1
    • WARNING!!! DO NOT TOUCH THESE Solder joints!!! High Voltage up to 300V..

    • Or discharge the flash condenser first, as per "Main PCB replace guide"

    • Remove 3 screws

  5. Nikon 1 J5 Back Case Replacement: passo 5, immagine 1 di 3 Nikon 1 J5 Back Case Replacement: passo 5, immagine 2 di 3 Nikon 1 J5 Back Case Replacement: passo 5, immagine 3 di 3
    • Left side, in connector bay, remove 2 screws.

    • Bottom, reomve 2 screws

    • Right side, remove 1 screw

  6. Nikon 1 J5 Back Case Replacement: passo 6, immagine 1 di 1
    • Peel here and remove 1 screw within.

  7. Nikon 1 J5 Back Case Replacement: passo 7, immagine 1 di 2 Nikon 1 J5 Back Case Replacement: passo 7, immagine 2 di 2
    • Pop open back case and remove it from body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Terrance

Membro da: 11/17/09

6.359 Reputazione

17 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 137