Salta al contenuto principale

Nike SportWatch GPS Front Panel Replacement

Cosa ti serve

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: passo 1, immagine 1 di 1
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: passo 2, immagine 1 di 1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: passo 3, immagine 1 di 1
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: passo 4, immagine 1 di 1
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: passo 5, immagine 1 di 1
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: passo 6, immagine 1 di 1
    • Push the panel out from the back of the screen, using your fingers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

Membro da: 10/22/15

678 Reputazione

4 Guide realizzate

Team

Un commento

Where I can find the replacement glass? regards

Erick Sobreiro - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,253