Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Face the watch upside down, so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws using a size 000 Phillips head screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully separate the watch by pulling the band away from the main board.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the black plastic piece above the battery out using a nylon or metal spudger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a guitar pick removal tool, push under the battery to pry the battery out of the watch.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The battery should then easily come out of the watch.
-
Annulla: non ho completato questa guida.
Altre 9 persone hanno completato questa guida.
Team
UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 Membro di UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015
UMASSD-GULBRANDSEN-F15S5G8
3 Membri
5 Guide realizzate
8 Commenti
Where can i buy a replacement battery?
Looks like you can buy them on ebay: http://www.ebay.com/itm/-/131819485344?
Thank you for this guide and the link to the replacement battery.
The battery I received had an extra circuit board and the contacts/metal bands were thinner and further apart thus making direct replacement difficult, there was no way to create proper connection with the spring contacts using the black plastic pc . I ended up removing the extra PCB and soldered the battery with short leads directly to the spring contacts and this worked well.
Unfortunately, it seems the battery wasn't the only issue with the watch.. last night it was fully charged however by this morning it was almost totally empty.
