Salta al contenuto principale

Nike SportWatch GPS Back Panel Replacement

Cosa ti serve

  1. Nike SportWatch GPS Back Panel Replacement, Back Panel: passo 1, immagine 1 di 1
    • Face the watch upside down, so that the back of the watch is exposed. Unscrew the six #000 size 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Back Panel Replacement: passo 2, immagine 1 di 1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Back Panel Replacement: passo 3, immagine 1 di 1
    • Pry the black plastic piece above the battery out using a nylon or metal spudger.

    • Be careful not to break the metal flat bands located above the plastic piece. They are fragile and easily breakable.

  4. Nike SportWatch GPS Back Panel Replacement: passo 4, immagine 1 di 1
    • Using a guitar pick removal tool, push under the battery to pry the battery out of the watch.

  5. Nike SportWatch GPS Back Panel Replacement: passo 5, immagine 1 di 1
    • After taking the battery out, you will be left with just the band and the backpanel part of the watch.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ian Eichorn

Membro da: 10/22/15

678 Reputazione

4 Guide realizzate

Team

3 Commenti

Where can I find a new watch band?

rhalljr68 - Replica

You canĀ“t. Nike left us alone

Leonardo Cartier - Replica

So, no way to repair the band then if there's no replacement parts? :(

roycy Tan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,543