Aggiusta la tua roba

Diritto alla Riparazione

Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nexus S Rear Inner Frame Replacement

Scritto Da: Walter Galan (e 2 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0

Difficoltà

Moderato

Passi

6

Tempo Necessario

Suggerisci un tempo??

Sezioni

1

Contrassegni

2

Prerequisite Only

Solo Prerequisita

Per favore tieni conto che questa guida è solo un prerequisito per altre guide.

Member-Contributed Guide

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Introduzione

Internal prereq..

  1. Remove the six Phillips screws securing the rear inner frame to the inner case.

    • Remove the six Phillips screws securing the rear inner frame to the inner case.

    Traduci

  2. Insert the flat edge of a plastic opening tool in between the rear inner frame and the top left corner of the Nexus S.

    • Insert the flat edge of a plastic opening tool in between the rear inner frame and the top left corner of the Nexus S.

    • Pry the opening tool upwards to pop the top right corner from the clips securing it to the inner assembly.

    Traduci

  4. Insert the plastic opening tool to the right of the power button. Slide the plastic opening tool downwards along the perimeter of the Nexus S to release the clips on the right side.

    • Insert the plastic opening tool to the right of the power button.

    • Slide the plastic opening tool downwards along the perimeter of the Nexus S to release the clips on the right side.

    Traduci

  5. In the same manner as previously described, release the bottom clips located near the bottom of the Nexus S. In the same manner as previously described, release the bottom clips located near the bottom of the Nexus S.

    • In the same manner as previously described, release the bottom clips located near the bottom of the Nexus S.

    Traduci

  6. Insert and pry the plastic opening tool to release the final clip securing the rear inner frame to the inner assembly.

    • Insert and pry the plastic opening tool to release the final clip securing the rear inner frame to the inner assembly.

    Traduci

  7. Lift and remove the rear inner frame from the Nexus S.

    • Lift and remove the rear inner frame from the Nexus S.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 287