Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nexus Q Inner Dome Daughterboard Replacement

Cosa ti serve

  1. Nexus Q Inner Dome Daughterboard Replacement, Taoglas PU18 Wi-Fi Dual Band Antenna: passo 1, immagine 1 di 1
    • Squeeze and pull to pop the cap off of the Nexus Q.

  2. Nexus Q Inner Dome Daughterboard Replacement: passo 2, immagine 1 di 2 Nexus Q Inner Dome Daughterboard Replacement: passo 2, immagine 2 di 2
    • Disconnect the taoglas Wi-Fi Dual Band Antenna by prying with a spudger.

    • Once the antenna is disconnected, simply pull it off the outside of the inner dome.

  3. Nexus Q Inner Dome Daughterboard Replacement, Inner Dome Daughterboard: passo 3, immagine 1 di 1
    • Undo the ZIF connector by prying with a spudger.

  4. Nexus Q Inner Dome Daughterboard Replacement: passo 4, immagine 1 di 1
    • Use a T10 Torx screwdriver to remove the four 1.3 mm screws holding the inner dome in place.

  5. Nexus Q Inner Dome Daughterboard Replacement: passo 5, immagine 1 di 1
    • Use a T6 Torx screwdriver to undo the three 0.8 mm screws holding the inner dome daughterboard in place.

  6. Nexus Q Inner Dome Daughterboard Replacement: passo 6, immagine 1 di 1
    • Use a spudger to disconnect the daughterboard from the ZIF connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Alex Thomas

Membro da: 01/31/13

27 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 7-10, Maness Winter 2013 Membro di Cal Poly, Team 7-10, Maness Winter 2013

CPSU-MANESS-W13S7G10

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 901