1. Using two fingers, push up on the rear cover.
    • Using two fingers, push up on the rear cover.

    Aggiungi Commento

  2. The rear cover slides up and off.
    • The rear cover slides up and off.

    Aggiungi Commento

    • Using the plastic opening tools, pry the left bottom corner of the battery up.

    Aggiungi Commento

    • Pull the battery up and out.

    Aggiungi Commento

    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

    #0 Phillis screw

    skuhry - Replica

    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

    Aggiungi Commento

    • Pry the upper left tab open on the battery housing.

    Aggiungi Commento

    • Pry the top tab of the battery housing.

    Aggiungi Commento

    • Pry the right side tab of the battery housing.

    Aggiungi Commento

    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

    Aggiungi Commento

    • Place the spudger under the metal cover and pry upwards. (shoot bottom side first with tabbed clip)

    • Swap the spudger to the other side of the cover base. Pry upwards. (fix?)

    • Grasp the camera module and pull up.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Niklas Johnson

Membro da: 31/01/2012

1.063 Reputazione

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,363