Salta al contenuto principale
  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use the plastic opening tool to remove the back cover. Carefully slide the tool between the front glass and back cover. Slide the tool along the edge to work the back cover off.
    • Use the plastic opening tool to remove the back cover. Carefully slide the tool between the front glass and back cover.

    • Slide the tool along the edge to work the back cover off.

    • It helps to have an extra tool to stick in the gap and keep the back cover separated from the glass as you slide the other tool.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the tape covering the motherboard. Remove the silver tape holding the white ribbon cables to the battery.
    • Remove the tape covering the motherboard.

    • Remove the silver tape holding the white ribbon cables to the battery.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a spudger to carefully disconnect the battery connector from the motherboard. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device.  The regular black nylon spudger or a plastic opening tool should be used whenever possible.
    • Use a spudger to carefully disconnect the battery connector from the motherboard.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a spudger to lift up the black bar on the  two ZIF connectors located above the battery.
    • Use a spudger to lift up the black bar on the two ZIF connectors located above the battery.

    • Pull the ribbon cables out of the connectors with tweezers or two fingers.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Using the flat end of a spudger, carefully work the spudger under the battery, lifting it off of the device. The battery is very malleable, so do not try to pull it off all at once.
    • Using the flat end of a spudger, carefully work the spudger under the battery, lifting it off of the device.

    • The battery is very malleable, so do not try to pull it off all at once.

Linea Traguardo

Altre 21 persone hanno completato questa guida.

Dylan Wiese

Membro da: 11/03/2015

1.829 Reputazione

5 Guide realizzate

Team

Very helpful and well made.

Quentin Freed - Replica

Where can I buy the battery???

scruff67 - Replica

Check Ebay. That's where I'm headed right now.

Tina Carey -

im having connection issues i cant find any wifi period

crusher309 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 24

Ultimi 30 Giorni: 110

Tutti i Tempi: 39,502