New Speed 26-inch Electric Bike Throttle Replacement

Introduzione

The throttle on an electric bike is important for proper function. When the throttle mode is engaged, the motor provides power, propelling the bike forward, similarly to a motorcycle or electric scooter. Without a working throttle, an electric bike loses important functionality, becoming little more than a regular, pedal-operated bike.

This guide will walk you through the steps to replace the throttle on a 26-inch New Speed electric bike. Make sure that your bike is off and not receiving power before starting.

Cosa ti serve

Passo 1 Electric Bike Throttle

New Speed 26-inch Electric Bike Throttle Replacement, Electric Bike Throttle: passo 1, immagine 1 di 1

Remove the 3/32" Allen screw from the top of the throttle.
When removing the screw, make sure the wrench is well seated to avoid damaging the screw.
Make sure that your bike's power is turned off before beginning to disassemble it.

Modifica

Passo 2

Remove the 5/64" Allen screw from the underside of the throttle.

Modifica

Passo 3

Slide the throttle off of the handlebar.
Be careful when removing the throttle. Taking it off too quickly could result in damage to the wiring.

Modifica

Passo 4

Remove the two 2mm Phillips screws from the back of the control box.
Repeat this process for the other side of the control box. 4 screws will be removed in total.

Modifica

Passo 5

Open the control box.

Modifica

Passo 6

Unwrap the cable lining surrounding the throttle cable.
Track the throttle cable to the control box.
Disconnect the JST-SM connector from the main controller.
Take caution while handling these wires. They can be easily damaged.

Modifica

Passo 7

Cut the zip ties found along the frame of the bike.
Remove the throttle and its wires from the frame of the bike.
Be careful not to cut too close to the wires, as you could risk damaging them or hurting yourself.