Salta al contenuto principale

Nest Dropcam Pro Motherboard Replacement

Cosa ti serve

  1. Nest Dropcam Pro Motherboard Replacement, Outer Case: passo 1, immagine 1 di 1
    • Press in the mounting clips on each side of the case to remove the camera from the mount.

  2. Nest Dropcam Pro Motherboard Replacement: passo 2, immagine 1 di 2 Nest Dropcam Pro Motherboard Replacement: passo 2, immagine 2 di 2
    • Using a Philips #0 screwdriver, remove the four 3 mm screws.

  3. Nest Dropcam Pro Motherboard Replacement: passo 3, immagine 1 di 2 Nest Dropcam Pro Motherboard Replacement: passo 3, immagine 2 di 2
    • Lift the front of the case slowly, as there is an antenna cable attached to the motherboard.

    • Carefully disconnect the antenna cable from the motherboard. You will feel this cable "pop" out of place when disconnected.

  4. Nest Dropcam Pro Motherboard Replacement, Motherboard: passo 4, immagine 1 di 2 Nest Dropcam Pro Motherboard Replacement, Motherboard: passo 4, immagine 2 di 2
    • Insert a spudger tool under the micro-USB port and lift to separate the motherboard from the back case.

  5. Nest Dropcam Pro Motherboard Replacement: passo 5, immagine 1 di 2 Nest Dropcam Pro Motherboard Replacement: passo 5, immagine 2 di 2
    • Pull the motherboard away from the back case.

    • Unplug the red and black cable connecting the motherboard to the back case.

  6. Nest Dropcam Pro Motherboard Replacement: passo 6, immagine 1 di 2 Nest Dropcam Pro Motherboard Replacement: passo 6, immagine 2 di 2
    • Using a Philips #0 screwdriver, remove the four 2 mm screws.

  7. Nest Dropcam Pro Motherboard Replacement: passo 7, immagine 1 di 2 Nest Dropcam Pro Motherboard Replacement: passo 7, immagine 2 di 2
    • Lift the lens and LED assembly away from the motherboard.

    • Unplug the yellow and white cable from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

David Foens

Membro da: 09/03/15

893 Reputazione

6 Guide realizzate

Team

USF Tampa, Team 15-4, Blackwell Fall 2015 Membro di USF Tampa, Team 15-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G4

3 Membri

12 Guide realizzate

7 Commenti

where we can get the mother board to replace

fercervantes - Replica

I need this too

kundimberi -

Where can I get the motherboard

xtogamba - Replica

Can't find it either. Silly to write an entire article for credit if parts arent actually available.

Bruce Weissman - Replica

searched for the MB online?? Why no mention of where to get it??

anonymous 6761 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 11

Tutti i Tempi: 8,720