Salta al contenuto principale

Nest Cam Side Snap Locks Replacement

Cosa ti serve

  1. Nest Cam Side Snap Locks Replacement, Side Snap Locks: passo 1, immagine 1 di 1
    • Remove the four 6 mm screws from the back panel with the J000 Phillips head screwdriver.

    • We suggest designated areas to keep track of all screws.

  2. Nest Cam Side Snap Locks Replacement: passo 2, immagine 1 di 3 Nest Cam Side Snap Locks Replacement: passo 2, immagine 2 di 3 Nest Cam Side Snap Locks Replacement: passo 2, immagine 3 di 3
    • Open the back panel completely to expose the inside of the Nest Cam.

    • Using the tweezers, disconnect the red and black mic cable from the motherboard.

  3. Nest Cam Side Snap Locks Replacement: passo 3, immagine 1 di 3 Nest Cam Side Snap Locks Replacement: passo 3, immagine 2 di 3 Nest Cam Side Snap Locks Replacement: passo 3, immagine 3 di 3
    • Disconnect the black Wi-Fi cable from the top of the motherboard with tweezers.

    • Use a plastic spudger to lift the motherboard and camera up enough to expose and disconnect the white cable with the tweezers.

    • Remove motherboard and camera completely from the housing.

  4. Nest Cam Side Snap Locks Replacement: passo 4, immagine 1 di 2 Nest Cam Side Snap Locks Replacement: passo 4, immagine 2 di 2
    • Remove the four 3 mm Phillips #J000 screws from the side snap locks. Remove the old side snap locks and place the new side snap locks.

    • Make sure everything lines up for the screws.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Lisa Langley

Membro da: 02/24/16

207 Reputazione

1 Guida realizzata

Team

USF Tampa, Team 1-1, Leahy Spring 2016 Membro di USF Tampa, Team 1-1, Leahy Spring 2016

USFT-LEAHY-S16S1G1

7 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 14

Tutti i Tempi: 1,989