Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Looking from the rear of the rifle, remove the two 10 mm phillips screws holding the orange cap to the butt of the rifle.
-
Pull off the orange cap.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the rifle barrel pointing left, remove the two 8 mm phillips screws holding the slide mechanism together.
-
Remove the three 10 mm phillips screws from the bottom of the slide mechanism.
-
Separate and remove the two halves of the slide mechanism.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Again with the rifle barrel pointing left, remove the fourteen 10 mm phillips screws from the main body of the rifle.
-
Remove the two 5 mm phillips screws from the main body.
-
Remove the two 8 mm phillips screws from the main body.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the two halves of the rifle apart.
-
Remove the access gate and barrel cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 5mm phillips screws from the rifle muzzle.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the muzzle and barrel from the rifle body.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.