Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement

Introduzione

A damaged barrel may negatively accuracy and overall performance of your rifle. in severe cases it may prevent your rifle from firing all together. This guide shows you how to access and replace the barrel of the Nerf gun.

Cosa ti serve

  1. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement, Rear Cap Removal: passo 1, immagine 1 di 3 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement, Rear Cap Removal: passo 1, immagine 2 di 3 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement, Rear Cap Removal: passo 1, immagine 3 di 3

    • Looking from the rear of the rifle, remove the two 10 mm phillips screws holding the orange cap to the butt of the rifle.

    • Pull off the orange cap.

    Traduci

  2. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement, Slide Removal: passo 2, immagine 1 di 3 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement, Slide Removal: passo 2, immagine 2 di 3 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement, Slide Removal: passo 2, immagine 3 di 3

    • With the rifle barrel pointing left, remove the two 8 mm phillips screws holding the slide mechanism together.

    • Remove the three 10 mm phillips screws from the bottom of the slide mechanism.

    • Separate and remove the two halves of the slide mechanism.

    • Make sure to keep track of which screws correspond to which holes.

    Traduci

  3. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 3, immagine 1 di 2 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 3, immagine 2 di 2

    • Again with the rifle barrel pointing left, remove the fourteen 10 mm phillips screws from the main body of the rifle.

    • Remove the two 5 mm phillips screws from the main body.

    • Remove the two 8 mm phillips screws from the main body.

    • Screws are varying lengths, make sure to keep track of which screws correspond to which holes.

    Traduci

  5. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 4, immagine 1 di 3 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 4, immagine 2 di 3 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 4, immagine 3 di 3

    • Pull the two halves of the rifle apart.

    • Be careful of the spring at the rear end of the rifle. It may come flying out.

    • If you have difficulty pulling the two halves apart, use a spudger to gently pry the edges of the body apart.

    • Also be careful of small parts when opening the gun, they may be easy to lose.

    • Remove the access gate and barrel cover.

    Traduci

  6. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 5, immagine 1 di 2 Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 5, immagine 2 di 2

    • Remove the two 5mm phillips screws from the rifle muzzle.

    Traduci

  7. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 6, immagine 1 di 1

    • Remove the muzzle and barrel from the rifle body.

    Traduci

  8. Nerf N-Strike Elite Alpha Trooper CS-12 Barrel Replacement: passo 7, immagine 1 di 1

    • Separate the muzzle from the barrel.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 4 altri collaboratori

Elizabeth Coffey

Membro da: 01/26/14

404 Reputazione

3 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Cal Poly, Team 10-35, Maness Winter 2014 Membro di Cal Poly, Team 10-35, Maness Winter 2014

CPSU-MANESS-W14S10G35

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 5,837