Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the robot upside down to locate the battery cover.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #1 screwdriver to unscrew both of the 20mm screws.
-
Gently lift the battery cover.
-
Remove the battery cover to reveal the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a flathead screwdriver to push down on the latch of the battery clip.
-
Simultaneously, pull on the battery while pushing down on the latch to detach the battery from the clip.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.