Aggiusta la tua roba Comunità Store

Nabi Jr Speakers Replacement

Cosa ti serve

  1. Nabi Jr Speakers Replacement, Rear Case: passo 1, immagine 1 di 1

    • Remove the red rubber case from the device. This should come off with ease.

    Modifica

  2. Nabi Jr Speakers Replacement: passo 2, immagine 1 di 1

    • Turn the device so the screen is facing away from you.

    • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

    Modifica

  4. Nabi Jr Speakers Replacement: passo 3, immagine 1 di 1

    • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

    Modifica

  5. Nabi Jr Speakers Replacement: passo 4, immagine 1 di 1

    • After loosening the back cover, remove it from the device so you can get at the innards.

    Modifica

  6. Nabi Jr Speakers Replacement, Speakers: passo 5, immagine 1 di 1

    • The speakers are located near the top of the device close to the camera.

    • Using a desoldering tool, remove the speakers from the pads they are soldered to.

    • Note that the red wire is removed from the pad labeled with a "+" and the black wire comes from the pad labeled with a "-".

    • Solder the new speaker's wires onto their respective pads

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Tobias Young

Membro da: 03/24/15

27 Reputazione

2 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 Membro di UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015

UMASSD-VIJAYBHASKAR-S15S4G3

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 828