Aggiusta la tua roba Comunità Store

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Scritto Da: Nicholas Eichman (e 2 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0
  • Completamenti: 3

Difficoltà

Facile

Passi

7

Tempo Necessario

10 - 15 minuti

Sezioni

1

  • 7 passi

Contrassegni

0

Strumenti

Ricambi

Nessuna parte specificata.

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Unplug all the external cables from the computer and ensure that the power supply is switched off. Unplug all the external cables from the computer and ensure that the power supply is switched off.

    • Unplug all the external cables from the computer and ensure that the power supply is switched off.

    Traduci

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the case side panel by applying pressure to the side and sliding the side panel toward the back of the case. Some cases may have screws that must be removed or tabs that must be pressed before the siding will slide off.

    • Remove the case side panel by applying pressure to the side and sliding the side panel toward the back of the case.

    • Some cases may have screws that must be removed or tabs that must be pressed before the siding will slide off.

    Traduci

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Pinch the lock at the end of the GPU power cable and carefully disconnect it. Pinch the lock at the end of the GPU power cable and carefully disconnect it. Pinch the lock at the end of the GPU power cable and carefully disconnect it.

    • Pinch the lock at the end of the GPU power cable and carefully disconnect it.

    Traduci

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the two Philips #1 mounting screws that attach the GPU to the inside of the case. Remove the two Philips #1 mounting screws that attach the GPU to the inside of the case. Remove the two Philips #1 mounting screws that attach the GPU to the inside of the case.

    • Remove the two Philips #1 mounting screws that attach the GPU to the inside of the case.

    Traduci

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Press down the locking tab at the base of the GPU. Press down the locking tab at the base of the GPU. Press down the locking tab at the base of the GPU.

    • Press down the locking tab at the base of the GPU.

    Traduci

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the GPU from the case. If it does not move, check to make sure that steps 3-5 were properly performed.

    • Remove the GPU from the case. If it does not move, check to make sure that steps 3-5 were properly performed.

    Traduci

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    When inserting a replacement GPU, ensure that the base is lined up properly with the appropriate slot on the motherboard. Once the replacement GPU is lined up, press down until you hear a click or can see that the locking tab is flipped up again.

    • When inserting a replacement GPU, ensure that the base is lined up properly with the appropriate slot on the motherboard.

    • Once the replacement GPU is lined up, press down until you hear a click or can see that the locking tab is flipped up again.

    Traduci
Linea Traguardo

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 8

Ultimi 7 Giorni: 46

Ultimi 30 Giorni: 209

Tutti i Tempi: 1,264