Salta al contenuto principale

NVIDIA GeForce GTX 970 GPU Replacement

Cosa ti serve

  1. NVIDIA GeForce GTX 970 GPU Replacement, GPU: passo 1, immagine 1 di 2 NVIDIA GeForce GTX 970 GPU Replacement, GPU: passo 1, immagine 2 di 2
    • Unplug all the external cables from the computer and ensure that the power supply is switched off.

  2. NVIDIA GeForce GTX 970 GPU Replacement: passo 2, immagine 1 di 2 NVIDIA GeForce GTX 970 GPU Replacement: passo 2, immagine 2 di 2
    • Remove the case side panel by applying pressure to the side and sliding the side panel toward the back of the case.

    • Some cases may have screws that must be removed or tabs that must be pressed before the siding will slide off.

  3. NVIDIA GeForce GTX 970 GPU Replacement: passo 3, immagine 1 di 3 NVIDIA GeForce GTX 970 GPU Replacement: passo 3, immagine 2 di 3 NVIDIA GeForce GTX 970 GPU Replacement: passo 3, immagine 3 di 3
    • Pinch the lock at the end of the GPU power cable and carefully disconnect it.

  4. NVIDIA GeForce GTX 970 GPU Replacement: passo 4, immagine 1 di 3 NVIDIA GeForce GTX 970 GPU Replacement: passo 4, immagine 2 di 3 NVIDIA GeForce GTX 970 GPU Replacement: passo 4, immagine 3 di 3
    • Remove the two Philips #1 mounting screws that attach the GPU to the inside of the case.

  5. NVIDIA GeForce GTX 970 GPU Replacement: passo 5, immagine 1 di 3 NVIDIA GeForce GTX 970 GPU Replacement: passo 5, immagine 2 di 3 NVIDIA GeForce GTX 970 GPU Replacement: passo 5, immagine 3 di 3
    • Press down the locking tab at the base of the GPU.

  6. NVIDIA GeForce GTX 970 GPU Replacement: passo 6, immagine 1 di 1
    • Remove the GPU from the case. If it does not move, check to make sure that steps 3-5 were properly performed.

  7. NVIDIA GeForce GTX 970 GPU Replacement: passo 7, immagine 1 di 2 NVIDIA GeForce GTX 970 GPU Replacement: passo 7, immagine 2 di 2
    • When inserting a replacement GPU, ensure that the base is lined up properly with the appropriate slot on the motherboard.

    • Once the replacement GPU is lined up, press down until you hear a click or can see that the locking tab is flipped up again.

Conclusione

To finish reassembly, follow steps 2-4 in reverse order.

Altre 11 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 76

Tutti i Tempi: 6,370