Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

NETGEAR WGT624 v3 Lower Case Replacement

Cosa ti serve

  1. NETGEAR WGT624 v3 Lower Case Replacement, Lower Case: passo 1, immagine 1 di 1
    • Turn the device so that the bottom is facing up.

  2. NETGEAR WGT624 v3 Lower Case Replacement: passo 2, immagine 1 di 3 NETGEAR WGT624 v3 Lower Case Replacement: passo 2, immagine 2 di 3 NETGEAR WGT624 v3 Lower Case Replacement: passo 2, immagine 3 di 3
    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. NETGEAR WGT624 v3 Lower Case Replacement: passo 3, immagine 1 di 2 NETGEAR WGT624 v3 Lower Case Replacement: passo 3, immagine 2 di 2
    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  4. NETGEAR WGT624 v3 Lower Case Replacement: passo 4, immagine 1 di 2 NETGEAR WGT624 v3 Lower Case Replacement: passo 4, immagine 2 di 2
    • Lift the lower case straight up from the rest of the router.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 3-31, Amido Winter 2013 Membro di Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 453