Introduzione

Replacing the power cord on the TF6 requires several wiring tools and previous experience with soldering. For soldering tips and directions, consult the guide on how to solder and desolder connections.

  1. Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.
    • Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.

    Aggiungi Commento

  2. Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.
    • Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.

    Aggiungi Commento

    • Gently lift the bottom cover, detaching it from the main body of the TF6.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Using a Phillips #1 screwdriver, remove the two 13mm Phillips screws that are securing the wire harness.

    Aggiungi Commento

    • Carefully lift the wire harness from the base of the TF6, detaching it completely.

    • The power cord wiring is now completely accessible.

    Aggiungi Commento

    • Using a set of wire cutters, cut both leads of the power cord at the heatshrinked area where the leads split.

    Aggiungi Commento

    • Using your fingers, pry the heatshrink off from the power cord leads.

    Aggiungi Commento

    • Using a 14-16 AWG wire stripper, strip the leads on the replacement power cord.

    Aggiungi Commento

    • Solder the power cord's positive lead to the white nylon wire.

    • Solder the power cord's ground lead to the bronze nylon wire.

    • Ensure the correct leads are being soldered together (power to power, ground to ground). Soldering the incorrect leads together will result in hazardous conditions for both the TF6 and the user when the unit is powered on.

      • Consult the replacement power cord's user manual, packaging, or manufacturer in order to verify the power and ground leads.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andrew

Membro da: 24/01/2014

101 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 13-18, Regan Winter 2014 Membro di Cal Poly, Team 13-18, Regan Winter 2014

CPSU-REGAN-W14S13G18

4 Membri

5 Guide realizzate

Good tutorial, I like this

Sfapa - Replica

Excellent! very helpful...

NP Designs 123 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 533