Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola syn1654A Speaker Module Replacement

Cosa ti serve

  1. Motorola syn1654A Speaker Module Replacement, Speaker Module: passo 1, immagine 1 di 2 Motorola syn1654A Speaker Module Replacement, Speaker Module: passo 1, immagine 2 di 2
    • See the speaker replacement guide and follow steps 1 and 2.

  2. Motorola syn1654A Speaker Module Replacement: passo 2, immagine 1 di 1
    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

  3. Motorola syn1654A Speaker Module Replacement: passo 3, immagine 1 di 1
    • Carefully lift the speaker out of its housing while leaving all wires connected.

  4. Motorola syn1654A Speaker Module Replacement: passo 4, immagine 1 di 1
    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: Come saldare e dissaldare componenti elettrici

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ben

Membro da: 02/24/14

104 Reputazione

1 Guida realizzata

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 240