Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola syn1654A Headphone Speaker Replacement

Cosa ti serve

  1. Motorola syn1654A Headphone Speaker Replacement, Headphone Speaker: passo 1, immagine 1 di 1
    • Make sure the headphones are off and unplugged from any devices.

    • Remove leather headphone cushion by pulling edge towards middle of headphone.

    • It should slip off the device.

  2. Motorola syn1654A Headphone Speaker Replacement: passo 2, immagine 1 di 1
    • Carefully peel back foam pad to prevent tearing.

    • It is glued at both the top and bottom.

  3. Motorola syn1654A Headphone Speaker Replacement: passo 3, immagine 1 di 1
    • Use the T6 torx screwdriver to remove the three screws holding the speaker in place.

    • To avoid stripping screws, be sure to use the right screw bit oriented perpendicular to the face of the screw.

  4. Motorola syn1654A Headphone Speaker Replacement: passo 4, immagine 1 di 1
    • With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.

    • Solder wires onto corresponding pads of replacement speaker.

    • For soldering see the ifixit soldering guide: Come saldare e dissaldare componenti elettrici

Conclusione

To reassemble your device, follow these instructions in reverse order.

John Ware

Membro da: 02/24/14

325 Reputazione

2 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 386