Introduzione

Removing the speaker requires the removal of the motherboard, which requires nearly a full dis-assembly of the phone.

Parti

Nessuna parte richiesta.

Place thumb on the rubber tab on the lower back of the phone.
  • Place thumb on the rubber tab on the lower back of the phone.

  • Push away from the phone to release back panel.

Aggiungi Commento

Lift the back panel of the phone to expose battery (not shown here).
  • Lift the back panel of the phone to expose battery (not shown here).

Aggiungi Commento

  • Pull antenna up, away from the phone, to reveal two of six screws.

Aggiungi Commento

  • Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.

Aggiungi Commento

  • Gently separate the front and back sides of the phone.

  • Be careful not to break or bend the ribbon cables.

Aggiungi Commento

  • Detach the first ribbon cable by unplugging it from the logic board.

Aggiungi Commento

  • Gently remove the side button by pulling the buttons away from the phone.

Aggiungi Commento

  • Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.

Aggiungi Commento

  • Slightly bend the phone frame to expose microphone protrusion.

  • Gently remove microphone using your fingers.

Aggiungi Commento

  • Once the microphone has been removed, remove the connecting piece

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Haley S

Membro da: 11/03/2013

1 Reputazione

4 Guide realizzate

Team

Clemson, Team 13-6, Benson Spring 2013 Membro di Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 102