Salta al contenuto principale

Motorola W385 Front Casing Replacement

Cosa ti serve

  1. Motorola W385 Front Casing Replacement, Battery: passo 1, immagine 1 di 1
    • Using your finger, press down on the clip holding the back cover on.

  2. Motorola W385 Front Casing Replacement: passo 2, immagine 1 di 1
    • Using the spudger or your finger, gently pull the battery out from the top.

  3. Motorola W385 Front Casing Replacement, Front Casing: passo 3, immagine 1 di 1
    • Remove the four rubber pieces from the face of the phone using the sharp end of the spudger.

    • The rubber pieces are held in with a mild adhesive.

  4. Motorola W385 Front Casing Replacement: passo 4, immagine 1 di 1
    • Remove the four Torx-6 screws from underneath the rubber pieces.

  5. Motorola W385 Front Casing Replacement: passo 5, immagine 1 di 2 Motorola W385 Front Casing Replacement: passo 5, immagine 2 di 2
    • Close the phone before proceeding.

    • Using the flat end of the spudger, insert it under the plastic at the top left of the phone.

    • Gently, although a small amount of force is required, use a twisting motion to pull the plastic casing away from the body of the phone.

    • Continue to move around the phone counter clockwise until the casing is separated from the body.

    • It is not unusual for it to pop off before making it back to the starting point.

  6. Motorola W385 Front Casing Replacement: passo 6, immagine 1 di 1
    • If the casing has not popped off of the body, remove it carefully from the the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 8-50, Regan Winter 2010 Membro di Cal Poly, Team 8-50, Regan Winter 2010

CPSU-REGAN-W10S8G50

3 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,921