Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola W315 Rear Case Replacement

Cosa ti serve

  1. Motorola W315 Rear Case Replacement, Battery: passo 1, immagine 1 di 1
    • Turn off the phone.

    • Turn the device over.

    • Remove the battery cover.

    • Insert thumb in the gap between the button and the battery and pry the battery upwards.

    • Pull the battery out of the phone.

  2. Motorola W315 Rear Case Replacement: passo 3, immagine 1 di 1
    • Insert the new battery.

  3. Motorola W315 Rear Case Replacement, Rear Case: passo 4, immagine 1 di 1
    • Four 5 mm screws are visible (circled in red).

    • Using the T6 tool, remove all four 5mm screws and set them aside.

  4. Motorola W315 Rear Case Replacement: passo 5, immagine 1 di 3 Motorola W315 Rear Case Replacement: passo 5, immagine 2 di 3 Motorola W315 Rear Case Replacement: passo 5, immagine 3 di 3
    • Insert the plastic opening tool between the front and back panels of the lower half of the device.

    • Slide the tool around the entire frame of the device until it has loosened.

    • Remove the back of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Information on recycling/disposing of your electronic waste is located under Additional Information on the device page.

Justin Scott

Membro da: 03/26/14

501 Reputazione

5 Guide realizzate

Team

Clemson, Team 6-3, Benson Spring 2014 Membro di Clemson, Team 6-3, Benson Spring 2014

CLEM-BENSON-S14S6G3

3 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 202