Parti

Nessuna parte richiesta.

Turn off the phone.
  • Turn off the phone.

  • Turn the device over.

  • Remove the battery cover.

Aggiungi Commento

  • Insert thumb in the gap between the button and the battery and pry the battery upwards.

  • Pull the battery out of the phone.

Aggiungi Commento

  • Insert the new battery.

Aggiungi Commento

  • Four 5 mm screws are visible (circled in red).

  • Using the T6 tool, remove all four 5mm screws and set them aside.

Aggiungi Commento

  • Insert the plastic opening tool between the front and back panels of the lower half of the device.

  • Slide the tool around the entire frame of the device until it has loosened.

  • Remove the back of the device.

Aggiungi Commento

  • Gently twist the antenna in a counter-clockwise direction to unscrew it.

Aggiungi Commento

  • Pull the antenna out through the hole in the top of the frame and set it aside.

Aggiungi Commento

  • Using a plastic opening tool, lift and remove the antenna casing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Information on recycling/disposing of your electronic waste is located under Additional Information on the device page.

Justin Scott

Membro da: 26/03/2014

501 Reputazione

5 Guide realizzate

Team

Clemson, Team 6-3, Benson Spring 2014 Membro di Clemson, Team 6-3, Benson Spring 2014

CLEM-BENSON-S14S6G3

3 Membri

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 118