Aggiusta le tue cose Community Store

Motorola V60s Button Key Pad Replacement

Introduzione

This guide will describe how to replace the numbered cover buttons in the in-hand partition of the Motorola V60.

Cosa ti serve

  1. Motorola V60s Button Key Pad Replacement, Battery: passo 1, immagine 1 di 3 Motorola V60s Button Key Pad Replacement, Battery: passo 1, immagine 2 di 3 Motorola V60s Button Key Pad Replacement, Battery: passo 1, immagine 3 di 3

    • Push in release lever towards top of phone, then use blue spudger to pry case off.

    • After case is removed from the back of the phone, you can simply use your hands to take it the rest of the way off.

    • Set cover aside in a safe location.

    Modifica

  2. Motorola V60s Button Key Pad Replacement: passo 2, immagine 1 di 2 Motorola V60s Button Key Pad Replacement: passo 2, immagine 2 di 2

    • Carefully grab battery towards bottom of phone.

    • Lift from bottom and take out of phone, set aside in a safe location.

    Modifica

  3. Motorola V60s Button Key Pad Replacement, Motherboard: passo 3, immagine 1 di 2 Motorola V60s Button Key Pad Replacement, Motherboard: passo 3, immagine 2 di 2

    • Remove the four corner screws with a T6 screwdriver.

    • The two top screws are short and silver. The two bottom screws are black and long.

    Modifica

  5. Motorola V60s Button Key Pad Replacement: passo 4, immagine 1 di 3 Motorola V60s Button Key Pad Replacement: passo 4, immagine 2 di 3 Motorola V60s Button Key Pad Replacement: passo 4, immagine 3 di 3

    • Use a spudger to gently pry off back chassis. Wedge the spudger in crevice between back panel and phone and lift.

    Modifica

  6. Motorola V60s Button Key Pad Replacement: passo 5, immagine 1 di 3 Motorola V60s Button Key Pad Replacement: passo 5, immagine 2 di 3 Motorola V60s Button Key Pad Replacement: passo 5, immagine 3 di 3

    • Starting from left side of phone, remove side buttons and place aside.

    • There are three buttons. One on each side, and the top.

    • Return phone to starting orientation when done.

    Modifica

  7. Motorola V60s Button Key Pad Replacement: passo 6, immagine 1 di 3 Motorola V60s Button Key Pad Replacement: passo 6, immagine 2 di 3 Motorola V60s Button Key Pad Replacement: passo 6, immagine 3 di 3

    • Gently remove orange ribbon cable by prying up with spudger.

    Modifica

  8. Motorola V60s Button Key Pad Replacement: passo 7, immagine 1 di 2 Motorola V60s Button Key Pad Replacement: passo 7, immagine 2 di 2

    • Use a spudger to pry up logic board by wedging in between logic board and chassis and lifting.

    • Orange ribbon cable is fragile and can be broken.

    Modifica

  9. Motorola V60s Button Key Pad Replacement, Button Key Board: passo 8, immagine 1 di 2 Motorola V60s Button Key Pad Replacement, Button Key Board: passo 8, immagine 2 di 2

    • Insert an opening tool under the button board and gently lift.

    Modifica

  10. Motorola V60s Button Key Pad Replacement, Button Key Pad: passo 9, immagine 1 di 2 Motorola V60s Button Key Pad Replacement, Button Key Pad: passo 9, immagine 2 di 2

    • Life button keypad with spudger and set aside.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

Eric Freeman

Membro da: 01/26/10

12 Reputazione

7 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 8-48, Regan Winter 2010 Membro di Cal Poly, Team 8-48, Regan Winter 2010

CPSU-REGAN-W10S8G48

4 Membri

13 Guide realizzate

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,095