Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola V60i Back Plate Replacement

Cosa ti serve

  1. Motorola V60i Back Plate Replacement, Battery: passo 1, immagine 1 di 2 Motorola V60i Back Plate Replacement, Battery: passo 1, immagine 2 di 2
    • Flip the phone over so the back cover is facing up.

    • Using either a finger or a spudger, press the button located near the top of the phone by the antenna.

  2. Motorola V60i Back Plate Replacement: passo 2, immagine 1 di 2 Motorola V60i Back Plate Replacement: passo 2, immagine 2 di 2
    • Pry up the back plate from the phone.

    • Push the button near the bottom of the battery using either your finger or the spudger to release the battery.

  3. Motorola V60i Back Plate Replacement, Back Plate: passo 3, immagine 1 di 1
    • Using a T6 Torx screwdriver, remove the four screws from the back of the phone.

  4. Motorola V60i Back Plate Replacement: passo 4, immagine 1 di 2 Motorola V60i Back Plate Replacement: passo 4, immagine 2 di 2
    • Simultaneously press the highlighted buttons on both sides of phone.

  5. Motorola V60i Back Plate Replacement: passo 5, immagine 1 di 1
    • Separate the back plate from the rest of phone.

    • Do not pull the wire connecting the front and back plates.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 30-40, Garner Spring 2010 Membro di Cal Poly, Team 30-40, Garner Spring 2010

CPSU-GARNER-S10S30G40

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 3,522