Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola V325 External Casing Replacement

Cosa ti serve

  1. Motorola V325 External Casing Replacement, External Casing: passo 1, immagine 1 di 3 Motorola V325 External Casing Replacement, External Casing: passo 1, immagine 2 di 3 Motorola V325 External Casing Replacement, External Casing: passo 1, immagine 3 di 3
    • Remove the rearmost panel by pushing down on the silver button, then simultaneously pulling downward on the panel.

    • Lift the panel off of the phone.

  2. Motorola V325 External Casing Replacement: passo 2, immagine 1 di 3 Motorola V325 External Casing Replacement: passo 2, immagine 2 di 3 Motorola V325 External Casing Replacement: passo 2, immagine 3 di 3
    • Using your thumbnail or a thin flat head screwdriver, peel back the screen protector on the inside of the phone: It is only held on by glue but may take a good amount of force to be removed.

  3. Motorola V325 External Casing Replacement: passo 3, immagine 1 di 2 Motorola V325 External Casing Replacement: passo 3, immagine 2 di 2
    • Unscrew the four screws using the T6 Torx Screwdriver.

  4. Motorola V325 External Casing Replacement: passo 4, immagine 1 di 3 Motorola V325 External Casing Replacement: passo 4, immagine 2 di 3 Motorola V325 External Casing Replacement: passo 4, immagine 3 di 3
    • Peel back the screen protector frame. Close phone at the hinge, then pull off the front outer casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Minh Tran

Membro da: 01/15/10

2 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 4-15, Forte Winter 2010 Membro di Cal Poly, Team 4-15, Forte Winter 2010

CPSU-FORTE-W10S4G15

5 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,088