Introduzione

Replacing a cracked or malfunctioning LCD display screen.

  1. Using the plastic opening tool, pry off the top faceplate.
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

    Aggiungi Commento

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

    Aggiungi Commento

    • Remove silver plate from phone.

    Aggiungi Commento

    • Using the spudger remove the plastic camera casing

    Aggiungi Commento

    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

    Aggiungi Commento

    • Use Spudger or hands to detach flex cable from front screen logic board

    Aggiungi Commento

    • Using the plastic opening tool, lift the small black flap to unlock the screen from the logic board.

    Aggiungi Commento

    • Using your fingers, carefully pull out the small LCD display screen.

    Aggiungi Commento

    • Remove the small LCD display screen completely from the green logic board.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cecilia

Membro da: 11/04/2010

1 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 27-96, Amido Spring 2010 Membro di Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 Membri

15 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,625