Introduzione

This guide details the process of removing the camera from an Motorola Triumph. Installation of the camera can be accomplished by reversing the process.

Slide the back cover down.
  • Slide the back cover down.

  • Lift the back cover up.

  • Pry the battery out with the spudger

Aggiungi Commento

Pry the battery out using the spudger
  • Pry the battery out using the spudger

Aggiungi Commento

  • After removing the Battery remove the two screws with a T4 screwdriver.

Aggiungi Commento

  • With the spudger, go around the seam of the phone and pry away the back chassis.

Aggiungi Commento

  • Using the T5 screwdriver, remove all the four screws shown in the picture.

Aggiungi Commento

  • Lift up the motherboard out of the device,

Aggiungi Commento

  • Pry the speakers out using the plastic spudger.

Aggiungi Commento

  • Locate the camera at the top of the motherboard.

Aggiungi Commento

  • Use the the spudger to unclip the connector above the camera.

  • Remove the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

greg

Membro da: 07/10/2014

12 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 7-5, Leahy Fall 2014 Membro di USF Tampa, Team 7-5, Leahy Fall 2014

USFT-LEAHY-F14S7G5

3 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 121