Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back battery cover by pressing the tab to the left, and lifting.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the batteries currently in the radio.
-
The orientation of the batteries is specified in the battery compartment.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Firmly grasp and pull back on the volume knob. The knob should come off smoothly.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 3 millimeter T6 Torx screws from the front of the radio.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 3 millimeter T8 Torx screws from the back of the radio.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently open the backplate of the radio. Use a flathead screwdriver to slowly pry apart the two sides.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pull the circuit board away from the front faceplate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The button contacts can be seen in the red box of the picture.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Dip q-tip in rubbing isopropyl alcohol, and swab button contacts to clean.
-
Note: Rubbing alcohol will evaporate, and does not need to be wiped off of contacts.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.