Salta al contenuto principale

Motorola SLVR L9 Camera Lens Cover Replacement

Cosa ti serve

  1. Motorola SLVR L9 Camera Lens Cover Replacement, Camera Lens Cover: passo 1, immagine 1 di 2 Motorola SLVR L9 Camera Lens Cover Replacement, Camera Lens Cover: passo 1, immagine 2 di 2
    • Turn the phone over so that the back of the phone is facing towards you.

  2. Motorola SLVR L9 Camera Lens Cover Replacement: passo 2, immagine 1 di 3 Motorola SLVR L9 Camera Lens Cover Replacement: passo 2, immagine 2 di 3 Motorola SLVR L9 Camera Lens Cover Replacement: passo 2, immagine 3 di 3
    • Press down on the battery cover latch located at the top of the phone.

    • Pull the battery cover down and away from the latch; then lift it up to remove the battery cover.

  3. Motorola SLVR L9 Camera Lens Cover Replacement: passo 3, immagine 1 di 1
    • Remove the four housing screws (1/8") from each corner of the transceiver PC board shield. Use a screwdriver with a T6 Torx screwdriver head to turn the screws counter-clockwise (left).

  4. Motorola SLVR L9 Camera Lens Cover Replacement: passo 4, immagine 1 di 2 Motorola SLVR L9 Camera Lens Cover Replacement: passo 4, immagine 2 di 2
    • Once you have removed all of the screws, lift the transceiver PC board shield up to remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 180