Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola Razr V3c Upper Casing (CDMA) Replacement

Cosa ti serve

  1. Motorola Razr V3c Upper Casing (CDMA) Replacement, Upper Casing (CDMA): passo 1, immagine 1 di 1
    • Remove the four rubber pieces from all corners of the area around the screen.

  2. Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 2, immagine 1 di 1
    • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Be sure that you do not strip or damage the screws.

  3. Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 3, immagine 1 di 1
    • Carefully pry the screen away from the phone using a plastic spudger.

    • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

  4. Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 4, immagine 1 di 3 Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 4, immagine 2 di 3 Motorola Razr V3c Upper Casing (CDMA) Replacement: passo 4, immagine 3 di 3
    • Take the screen housing off of the casing.

    • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

krisko

Membro da: 01/14/10

104 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 11-4, Forte Winter 2010 Membro di Cal Poly, Team 11-4, Forte Winter 2010

CPSU-FORTE-W10S11G4

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 5,203