Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola Razr V3c Lower Casing (CDMA) Replacement

Cosa ti serve

  1. Motorola Razr V3c Lower Casing (CDMA) Replacement, Battery (CDMA): passo 1, immagine 1 di 3 Motorola Razr V3c Lower Casing (CDMA) Replacement, Battery (CDMA): passo 1, immagine 2 di 3 Motorola Razr V3c Lower Casing (CDMA) Replacement, Battery (CDMA): passo 1, immagine 3 di 3
    • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

    • Lift and remove the rear panel away from the V3c.

  2. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 2, immagine 1 di 2 Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 2, immagine 2 di 2
    • Remove the battery by pushing in the top of the battery and lifting it away from the phone.

  3. Motorola Razr V3c Lower Casing (CDMA) Replacement, Speaker (CDMA): passo 3, immagine 1 di 1
    • Unscrew the two screws in the back using the T6.

  4. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 4, immagine 1 di 1
    • Use the plastic opening tool to pop the bottom and the sides off the back casing.

    • Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.

  5. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 5, immagine 1 di 1
    • Peel off the connector between the motherboard and the body of the phone.

  6. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 6, immagine 1 di 2 Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 6, immagine 2 di 2
    • Pull out the two black rubber covers using tweezers.

    • The second rubber cover is much harder to get out.

  7. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 7, immagine 1 di 2 Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 7, immagine 2 di 2
    • Pull out the white plastic cover by unclipping the two plastic pieces shown.

  8. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 8, immagine 1 di 1
    • Pull out the speaker.

  9. Motorola Razr V3c Lower Casing (CDMA) Replacement, Motherboard (CDMA): passo 9, immagine 1 di 2 Motorola Razr V3c Lower Casing (CDMA) Replacement, Motherboard (CDMA): passo 9, immagine 2 di 2
    • Pull out the motherboard.

    • You may also now replace the bottom lower casing

  10. Motorola Razr V3c Lower Casing (CDMA) Replacement, Lower Casing (CDMA): passo 10, immagine 1 di 1
    • Unscrew the two screws holding the plastic speaker cover to the phone with a T5 screwdriver

  11. Motorola Razr V3c Lower Casing (CDMA) Replacement: passo 11, immagine 1 di 1
    • Pull off and replace the lower front casing

    • The metallic grounding grid will come off when the lower front casing is removed

    • Make sure to reinsert the metallic grounding unit when re-screwing the new lower bottom casing

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

krisko

Membro da: 01/14/10

104 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 11-4, Forte Winter 2010 Membro di Cal Poly, Team 11-4, Forte Winter 2010

CPSU-FORTE-W10S11G4

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 6,238