Introduzione

This guide will show you how to remove and replace the camera for a Motorola V3c.

Parti

Nessuna parte richiesta.

Remove the four rubber pieces from all corners of the area that borders the screen.
  • Remove the four rubber pieces from all corners of the area that borders the screen.

Aggiungi Commento

Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
  • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

  • Be sure that you do not strip or damage the screws.

Aggiungi Commento

  • Carefully pry the screen away from the phone using a plastic spudger.

  • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

Aggiungi Commento

  • Take the screen housing off of the casing.

  • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

Aggiungi Commento

  • Pry screen cover off with plastic spudger.

  • The screen cover has some adhesive holding it to the screen

Aggiungi Commento

  • Remove small black sticker covering the camera ribbon connector.

Aggiungi Commento

  • Flip over small hinge that covers the camera ribbon connection.

Aggiungi Commento

  • Pull off the rubber camera cover and camera.

  • The camera and camera cover may come off either separately or together.

Aggiungi Commento

Linea Traguardo

Joshua Ruehlig

Membro da: 14/01/2010

503 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 11-4, Forte Winter 2010 Membro di Cal Poly, Team 11-4, Forte Winter 2010

CPSU-FORTE-W10S11G4

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 4,359