Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola RIZR Z3 Motherboard Replacement

Introduzione

Guide to replacing your phone's motherboard.

Cosa ti serve

  1. Motorola RIZR Z3 Motherboard Replacement, Battery: passo 1, immagine 1 di 2 Motorola RIZR Z3 Motherboard Replacement, Battery: passo 1, immagine 2 di 2

    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

    Traduci

  2. Motorola RIZR Z3 Motherboard Replacement: passo 2, immagine 1 di 2 Motorola RIZR Z3 Motherboard Replacement: passo 2, immagine 2 di 2

    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

    Traduci

  3. Motorola RIZR Z3 Motherboard Replacement, Motherboard: passo 3, immagine 1 di 1

    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

    Traduci

  5. Motorola RIZR Z3 Motherboard Replacement: passo 4, immagine 1 di 2 Motorola RIZR Z3 Motherboard Replacement: passo 4, immagine 2 di 2

    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

    Traduci

  6. Motorola RIZR Z3 Motherboard Replacement: passo 5, immagine 1 di 1

    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

    Traduci

  7. Motorola RIZR Z3 Motherboard Replacement: passo 6, immagine 1 di 2 Motorola RIZR Z3 Motherboard Replacement: passo 6, immagine 2 di 2

    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

    Traduci

  8. Motorola RIZR Z3 Motherboard Replacement: passo 7, immagine 1 di 2 Motorola RIZR Z3 Motherboard Replacement: passo 7, immagine 2 di 2

    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

    Traduci

  9. Motorola RIZR Z3 Motherboard Replacement: passo 8, immagine 1 di 2 Motorola RIZR Z3 Motherboard Replacement: passo 8, immagine 2 di 2

    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Andrew Brock

Membro da: 10/07/11

8 Reputazione

1 Guida realizzata

Distintivi: 8

+5 altri distintivi

Team

Cal Poly, Team 5-34, Amido Fall 2011 Membro di Cal Poly, Team 5-34, Amido Fall 2011

CPSU-AMIDO-F11S5G34

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,320