Introduzione

This guide outlines the steps to disassemble the Q Global to access the internal speakers. It can be used to replace or repair a damaged speaker.

Parti

Nessuna parte richiesta.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

Aggiungi Commento

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

Aggiungi Commento

  • Press inwardly on the upper casing until it pops out of the phone.

Aggiungi Commento

  • Slide the upper case rightward and lift up.

  • Lift the camera sticker so that it does not get damaged.

Aggiungi Commento

  • Remove the six labeled screws with a T5 torx screw driver.

Aggiungi Commento

  • Once the screws are removed, use the plastic opening tool to remove the black casing.

Aggiungi Commento

  • Remove the speakers by using the plastic remover tool.

Aggiungi Commento

  • Insert the new speakers by gently pressing them down into place.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 6-31, Regan Fall 2012 Membro di Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 540