Introduzione

The antenna is a vital piece of hardware in the i880. It is used to send and receive data submitted between this phone and other devices.

  1. Remove back cover of the phone by disengaging the clip and lifting up on the cover.
    • Remove back cover of the phone by disengaging the clip and lifting up on the cover.

  2. Locate the screw on the top left portion of the phone; just below the antenna. Using a T4 Torx screwdriver remove the screw.
    • Locate the screw on the top left portion of the phone; just below the antenna. Using a T4 Torx screwdriver remove the screw.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Slide antenna out of the phone. Ensure that the protective plastic sleeve is not lost in removal.
    • Slide antenna out of the phone. Ensure that the protective plastic sleeve is not lost in removal.

  5. Slide and secure new antenna into position. Make sure metal receiver is facing forward.
    • Slide and secure new antenna into position. Make sure metal receiver is facing forward.

  6. Reattach back cover and secure all components in place.
    • Reattach back cover and secure all components in place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ryan

Membro da: 19/10/2014

13 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 72