Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola Moto X Battery Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Motorola Moto X Battery Replacement, Battery: passo 1, immagine 1 di 3 Motorola Moto X Battery Replacement, Battery: passo 1, immagine 2 di 3 Motorola Moto X Battery Replacement, Battery: passo 1, immagine 3 di 3
    • Insert the tip of a spudger under the battery cable near the connector to lift it straight up from its socket.

    • Use the flat end of a spudger to disconnect the NFC antenna cable connector.

  2. Motorola Moto X Battery Replacement: passo 2, immagine 1 di 3 Motorola Moto X Battery Replacement: passo 2, immagine 2 di 3 Motorola Moto X Battery Replacement: passo 2, immagine 3 di 3
    • Use the tip of a spudger to flip up the ZIF retaining flap from the button assembly cable connector.

    • Slide the tip of the spudger under the button assembly cable near the connector to pull the cable straight out of its socket.

  3. Motorola Moto X Battery Replacement: passo 3, immagine 1 di 2 Motorola Moto X Battery Replacement: passo 3, immagine 2 di 2
    • Insert the flat end of a spudger under the interconnect cable to free it from the adhesive holding it to the battery.

  4. Motorola Moto X Battery Replacement: passo 4, immagine 1 di 2 Motorola Moto X Battery Replacement: passo 4, immagine 2 di 2
    • Use the flat end of a spudger to peel the adhesive pull-tab off the top of battery.

  5. Motorola Moto X Battery Replacement: passo 5, immagine 1 di 3 Motorola Moto X Battery Replacement: passo 5, immagine 2 di 3 Motorola Moto X Battery Replacement: passo 5, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Tesa 61395 Tape
    $5.99
    Compra
    • Use the adhesive pull-tab to lift the battery from its recess.

    • The battery is secured to the motherboard with mild adhesive. Peel slowly, and be careful not to bend or puncture the battery.

    • Remove the battery from the phone.

    • When reassembling your phone secure the battery with double-sided tape or pre-cut adhesive strips.

Conclusione

Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Motorola Moto X Answers community for troubleshooting help.

Sam Goldheart

Membro da: 10/18/12

465.252 Reputazione

538 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

16.573 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 43