Salta al contenuto principale
  1. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: passo 1, immagine 1 di 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: passo 1, immagine 2 di 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: passo 1, immagine 3 di 3
    • Remove SIM card tray.

  2. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 2, immagine 1 di 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 2, immagine 2 di 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 2, immagine 3 di 3
    • Remove back cover.

  3. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 3, immagine 1 di 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 3, immagine 2 di 2
    • Remove those two rubber cover.

  4. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 4, immagine 1 di 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 4, immagine 2 di 2
    • Release power connecting flex connector and battery connector.

  5. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 5, immagine 1 di 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 5, immagine 2 di 2
    • Twist off all 18 black torx screws and remove the middle housing from front assembly.

  6. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 6, immagine 1 di 2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 6, immagine 2 di 2
    • Release power flex connector from connecting flex.

  7. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 7, immagine 1 di 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 7, immagine 2 di 3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 7, immagine 3 di 3
    • Remove securing bracket and side buttons.

  8. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: passo 8, immagine 1 di 1
    • Pry up and remove the power flex.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 10 persone hanno completato questa guida.

Sophia

Membro da: 25/03/2014

43.579 Reputazione

62 Guide realizzate

3 Commenti

Followed your instructions. Volume works, power button still no go.

It clicks fine, but nothing happens..

Carlo Petermann - Replica

I have the same issue. Any ideas? Resolutions?

sagar bhale -

The screwdriver is T4 on my european moto X 2014, not T3!!

Clément Masci - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 4,938