Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Push Pin to remove the rubber screw covers by pushing the needle into the rubber and pulling up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the T6 screwdriver to remove the four screws holding the casing together.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once you get the plastic opening tool in, slide it across the side of the phone, making sure to keep the plastic opening tool wedged in between the two casings.
-
Repeat the 3 steps above for the top, bottom, and opposite side.
-