Introduzione

Follow this guide to replace a scratched or worn back cover for the Motorola Moto G5.

Parti

Nessuna parte richiesta.

Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.
  • Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.

  • Pry with your fingernail or twist the spudger to release the back cover from the phone.

Aggiungi Commento

Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.
  • Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.

Aggiungi Commento

  • Continue sliding the flat end of the spudger along the seam for the remaining sides of the phone.

Aggiungi Commento

  • Lift the back cover and remove it from the phone.

  • To reinstall the back cover, align the cover with the phone and squeeze along the edges to snap the clips back into place.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Check out our Motorola Moto G5 Answers community for troubleshooting help.

Arthur Shi

Membro da: 03/01/2018

21.654 Reputazione

82 Guide realizzate

Team

iFixit Membro di iFixit

Community

107 Membri

6.499 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 43

Ultimi 30 Giorni: 94

Tutti i Tempi: 94